ULC Course Description
HW Manifest/DOT Certification
Control Number: 223
Course Number: 56HWM01A
Length:36
CEUs: 0.00 PDHs: 0.00 LUs: 0.00 PDUs: 0.00 CMs: 0.00 ACE: 0.00 CEHs: 0.00
Purpose:
This 36-hour course provides initial training regarding regulatory requirements of the Hazardous Materials Transportation Act (HMTA) and the Resource Conservation and Recovery Act (RCRA) as it applies to the generation, transportation, and disposal of HAZMAT focusing upon hazardous waste. It enables employers to certify that as required by 49 CFR 172 Subpart H, that their employees have been trained and tested on general awareness and function specific elements described below. In addition, this is an ISEERB approved and DoD approved course as per DoD 4500.9-ER. It has been reviewed by subject matter experts from DOD components and found to be suitable for more than one agency. (Note: Certain RCRA and safety related training elements required by 49 CFR 172 Subpart H and 40 CFR 265.16 are typically site-specific and must be performed on the job.)
Description:
Training topics cover the identification and classification of hazardous wastes for purposes of preparing a hazardous waste manifest and fulfilling the DOT requirements for shipping hazardous wastes. Specifically, training topics include RCRA waste classification, land disposal restrictions and notifications, generator requirements, manifesting requirements, identification of a DOT reportable quantity, use of the Hazardous Materials Table, DOT requirements for determining a shipping name, properly packaging, labeling, marking and placarding, and DOT emergency response requirements, and general security awareness training. In addition, the course addresses special EPA and DOT requirements for shipping asbestos and PCBs.
Prerequisites:
There is no prerequisite for this course, but this course can satisfy the prerequisite for PROSPECT course #429. This course is primarily targeted at persons in the following series: 0800, 0820, 0809, 0810, 0819, 0028, 0029, 0025, 0026, 0401, 1350, 1301, 0893, 0830, 1306, and 1320 (All series involved with environmental programs, including all engineers, chemist, industrial hygienists, health physicists, biologists, geologists, hydrogeologists, program managers, planners, etc.) as well as all Installation environmental staff, Civil Works Environmental Compliance Coordinators and Civil works personnel required to sign HAZMAT shipping documents and/or hazardous waste manifests. The training is designed for persons with any of the following job responsibilities: identification of proper shipping names for hazardous wastes in accordance with DOT regulations; selection of appropriate packaging, marking, labels and placards in accordance with DOT regulations; RCRA waste identification and classification; completion or review of hazardous waste manifests and/or land disposal restriction notifications; preparation of shipping documents for used oil, asbestos and PCBs; shipping of analytical samples; loading or unloading of hazardous wastes; and transportation of hazardous materials in general.
Notes:
If you would like to enroll in a class, click here for more information.
If you are already enrolled and have questions about a class see links below.
For course dates, locations, and enrollment information, click here.
For course content, purpose, description or prerequisites, click here.
Sessions: This information is updated nightly and may be up to 24 hours old.
| Session | Location | Start Date | End Date | Seats Open |
|---|